|
Specification for Latex Anti-C Gloves
The latex gloves conform to the requirements of MIL-G-82242D. The following nominal characteristics are common to all CTL latex gloves.
Material: Natural latex; colored in accordance with specific ordering data. Gloves are case-hardened using a chlorinating process with the residual chlorine removed. (Chemical composition: Natural Latex Rubber ; less than 1% each of the following processing aids; Sulfur, Zinc Oxide, SOXINOL EZ, SOXINOL TP and ANTIGENE SP.)
Marking: Gloves are marked with the size on the palm side of the wrist. The Anti-C symbol and other markings (e.g. SEG symbol) may be included.
Design: Gloves are standard Right & Left, four finger & thumb style with rolled cuffs. An embossed anti-slip pattern covers the palm, finger and thumb.
Physical requirements:
| Tensile strength | 3800 psi min. |
| Elongation | 750 % min. |
| Specific Gravity | .94 - 1.15 |
| Thickness | .018" nominal; .016" min. |
Measurements:
| Size | 8 | 9 | 10 | 11 | Tolerance |
|
Width of palm | 4" | 4.5" | 5" | 5.5' | +/- .25" |
|
Width of wrist | 3.25" | 3.75" | 4" | 4.25" | min. |
|
Length | (12", or 15" as specified, +/- 0.5 " .) |
Packaging: Normally packaged 100 pairs per box.
Color: Available in "red/magenta", "orange", "yellow", & "natural/beige/ivory".
Stock code: KGP-0915-Y Indicates an anti-c glove that is sz 9, 15" long and yellow color.
|
|
